Ring Doorbell 3 is a smart, Wi-Fi-enabled device that lets you keep tabs on your front and back doors and see who’s at the door. To use Ring 3, you need to have an existing doorbell on your property with a chime button. However, can you use ring doorbell 3 without an existing doorbell? continue reading to learn how to use your ring doorbell 3 without an existing doorbell.
Can I Use Ring Doorbell 3 Without an Existing Doorbell? Yes, you can use your ring doorbell 3 without an existing doorbell. You can utilize your Ring Doorbell 3 without an existing doorbell or chime by utilizing an indoor power converter with a transformer regulating the voltage to power the Ring doorbell. However, you may not need all this if your ring doorbell 3 is battery-powered.
If there are no wires, the simplest approach to install a Ring video doorbell is to utilize an indoor power converter that plugs into a power source. It is a basic adapter with a built-in transformer that guarantees your Ring Video Doorbell receives the correct voltage.
You only need to connect the Ring doorbell and plug in the adaptor. It is a simple plug-and-play solution that you can set and forget.
Ring Doorbell 3 has become a highly popular doorbell for homeowners since it enhances your home security system in an entertaining way. It is simple to set up, especially if you do not already have a doorbell. Ring doorbell 3 includes everything you’ll need right in the package.
The Ring Video Doorbell 3 is the best option for those who want to make their home more secure. It comes with a lot of great features like motion detection, night vision, and two-way audio and the installation is simple.
How to install Ring Doorbell 3 without an existing doorbell
The installation of the Ring Video doorbell 3 without an existing doorbell is relatively straightforward. We can give you a step-by-step approach for installing the ring doorbell 3 in this post. Keep in mind that you must first install the ring doorbell app on your smartphone before physically installing the doorbell.
1. Charge the provided battery
The first step is to thoroughly charge the battery before attaching it to a power source via the orange cable. When the battery is fully charged, the green light will turn off. Insert the battery into the doorbell’s end. The sound of the click will indicate that the battery has been properly inserted.
Please keep in mind that if the gadget is not entirely charged before use, the battery drain indicator will appear on the screen. As a result, it is advised that the battery be charged prior to installing the doorbell.
2. Arrange Your Ring Doorbell
The procedures to properly aligning the Ring doorbell 3 are listed below.
- Make a hole beneath the camera in front of the doorbell.
- Place the camera near the front door. You must also ensure that the doorbell is 48 inches above the ground.
- Take a level tool and use it to level the gadget.
- Take a pencil and mark the locations where mounting holes must be drilled.
- Install a Ring Video Doorbell 3 in the absence of an existing doorbell.
Now that we’ve finished marking, it’s time to drill the holes. If you want to place the Ring Doorbell on stucco, concrete, or brick, you must use the plastic anchors that come with it. Place them in the holes and use a hammer to secure the anchors.
If you’re utilizing a removable adaptor mounting plate on vinyl or wood, just use the screws.
4. Insert the Ring Video Doorbell 3 into the Holes.
It is now time to position your Ring Video Doorbell 3 over the holes. Remove the level tool from the front of the device.
5. Install the Screws in the Ring Doorbell 3
Feed the cables into the wall, then hang your Ring Doorbell 3. Make certain that all four screws are used.
Install a Ring Video Doorbell 3 in the absence of an existing doorbell.
6. Install the Faceplate
Place one of the faceplates on your Ring Doorbell by placing it in the slot and clicking it into place.
7. Tighten the Screw
Use one of the included security screws to secure the faceplate. So, these are the procedures you must take in order to install Ring Video Doorbell 3 without an existing doorbell.
Ring Doorbell 3 Voltage Requirements
The Ring Video Doorbell 3 requires a voltage range of between 110 and 240 volts, meaning that it’s not compatible with some outlets.
The Ring Doorbell 3 can use batteries or an electrical outlet and does not require a pre-existing doorbell. The power requirements for the device are 110 volts and 16 amps, which is enough to run it on most homes.
It’s also easy to install as all you need is a screwdriver, two screws, wire strippers (or pliers), gloves (if your hands get wet), and some tools that may be included in the package like rubber washers or drywall anchors if you need to install it inside a wall.
This product is fairly affordable and has an easy installation process which makes it worth the price for most people.